Feb 16, 2023 Lasciate un messaggio

Heat Treatment Process

Thermal treatment process generally comprises heating, insulation, three processes of cooling, has only two processes of heating and cooling sometimes. These processes are connected with each other and cannot be interrupted. Heating is one of the important processes of heat treatment. The heating means of metal heat treatmet are a lot, are the earliest to adopt charcoal and coal as thermal source, and then using liquid and geseous fuel. The application of electricity makes the heating easy to control without environmental pollution. These heat sources can be used for direct heating, or through molten salt or gold, or even floating particles for indirect heating. When the metal is heated, the workpiece is exposed to the air, and oxidation and decarburization often occur (that is, the carbon content on the surface of the steel part is reduced), which has a very adverse effect on the surface properties of the parts after heat treatment. Therefore, metals should usually be heated in a controlled atmosphere or protective atmosphere, molten salt and vacuum, and can also be protected by coating or packaging methods. Heating temperature is one of important technological parameter of heat treatment process, selects and controls Heating temperature, and is the subject matter that guarantees heat treatment quality. Heating temperature is different and different with processed metallic material and the purpose of heat treatment, but generally all is to be heated to more than the transformation temperature, to obtain high-temperature microstructure. In addition, the transformation takes a certain amount of time, so when the surface of the metal workpiece reaches the required heating temperature, it must be kept at this temperature for a certain period of time to make the internal and external temperatures consistent and complete the microstructure transformation. This period of time is called holding time. When adopting high-energy-density heating and surface heat to handle, rate of heating is exceedingly fast, and generally just do not have soaking time, and the soaking time of thermo-chemical treatment is often longer.

Cooling is also an indispensable step in the heat treatment process. The cooling method is different due to different processes, mainly to control the cooling rate. General annealed speed of cooling is the slowest, normalizing speed of cooling is very fast, and quenching speed of cooling is faster. However, there are different requirements due to different steel types. For example, empty hard steel can be hardened at the same cooling rate as normalizing.

Invia la tua richiesta

whatsapp

Telefono

VK

Inchiesta